SlipDoctors Non Slip Resistant Spray for Fiberglass, White

Features

• Works on porcelain and fiberglass bathtubs
• Great alternative to bath mats
• Slip resistant; easy to clean
• Dries in 20 minutes or less
• Maximum durability and strong adhesion

Product Details

• Product Dimensions: 7.8 x 2.6 x 1.7 inches; 1.03 pounds
• Shipping Weight: 1.03 pounds
• ASIN: B00AN8DFXI
• Item model number: 856669002158
• Average Customer Review: Customer Reviews

Product Description

SlipDoctors slip resistant spray will create a durable, flat textured finish that sticks firmly to most any surface. Increased surface traction creates a safer walking surface that will reduce the likelihood of a slip-and-fall accident. Friendly to bare feet, lead-free, chemical, gas and oil resistant, for use indoors or outdoors. It is ideal for any surface that is slick when wet. Can be used on fiberglass, concrete, metal, fiberglass, tiles, VCT, porcelain and many other surfaces. Eliminates need for bathmats. Slip resistant; easy to clean. Long Lasting. Dries in 20 minutes or less. Maximum durability and strong adhesion. Ease of application: convenient aerosol spray can. Ideal for coating smaller or irregularly shaped surfaces and designed for interior and exterior use. Grit: no sharp edges, friendly to bare feet. Coverage: up to 15 square feet per can. Application temperature: 50 to 90 degrees F/ 10 to 32 degrees C. Dry to touch: dries quickly in 10 to 20 minutes. Dry to handle: can be handled or recoated in approximately 1 hour. Dries hard: allow 24 hours at 77 degrees F/25 degrees C before subjecting to heavy foot traffic. Permanent: yes, but can be removed by sanding. Lead free: pigments contain no lead. CFCs (Chlorofluorocarbon): contains no CFCs or other substances which deplete the ozone layer. VOC percent: meets VOC standards; 80 percent - slip resistant coating. Excellent gas and oil resistant. Clean up: clean valve immediately after each use by holding can upside down and spraying until clear gas comes out (3-5 seconds). If spray valve becomes clogged, pull off and clean in lacquer thinner.